Restore dried cartridges
Quite often, owners of inkjet printers are faced with such a problem as a "dried cartridge". This is due to the fact that the printer has been standing for a long time without work. To prevent this from happening, experts advise printing one sheet of paper at least a week.
Well, if it really happened and your cartridge dried up, then I hope you can use this technique to restore the dried cartridges. There are 3 ways to prepare the compositions in order to “soak” the dried cartridge. Alkaline, acidic and neutral.
1) The acid composition is suitable for such “HP color” printers. Its composition: 10% acetic acid essence, 10% alcohol, 80% distilled water.
2) Neutral, suitable for most printers: 10% glycerin, 10% alcohol, 80% distilled water.
3) Alkaline, suitable for Epson, Canon printers: 10% ammonia, 10% alcohol, 10% glycerin, 70% distilled water.
All formulations must be filtered after preparation.To do this, you can use toilet paper or a tissue.
After preparing one of the formulations, the question will immediately appear: “How to soak the cartridge? »I'll tell you: drain all the ink from the cartridge, pour the solution inside and lower the entire cartridge into the solution. And let him unlock 1-3 for. This procedure is not suitable for foam cartridges, for them it is necessary to wet the napkin and put the cartridge on it with the nozzles on the napkin. After all the procedures done, you need to purge the cartridge with a syringe in both directions, for this it is better to use a rubber or silicone adapter. Do not overdo it with a purge. HP, Lexmark, Canon and the like, are rather successfully restored this way.
Epson printers are restored a little differently. Take the head to the side, make a piece of appropriate size from a piece of cloth or napkin, wet it with a solution and attach the head to the place of parking and pack the head.
And it is better to remove the head and immerse its nozzles in the solution.
Leave for a day. Do not try to blow it after the end of the syringe. Turn on the cleaning 2-3 times (there is such a function in the printer).On working cartridges, it should start printing.
If one type of composition did not work, then try another.
I managed to restore many dried printers in such ways!
Date: 08.10.2018, 12:27 / Views: 64192
Glass vase miniature
Gorgeous color Marsala: 6 ideas for creating a stylish outfit
How to make a bookmark-corner bat
Crafts from natural materials
20 amazing and bright stairs from around the world