PVC pipe stand

I decided to make a stand for screwdrivers and pliers. It should be fixed to the table, since in the near future it is planned to move the workplace. I also wanted to be able to change its size depending on the number of available tools. Considering the various options, I came to the conclusion that I could quickly and easily make a stand made of PVC pipes. Tools:
  • Roulette.
  • Marker.
  • Hacksaw (or scissors for plastic pipes).
  • Drill and drill.
  • Clamps .
  • Scraper.
  • Rubber hammer.
Materials:Below are the materials I used. Their dimensions will depend on the dimensions of your stand.
  • 150 cm 12 mm PVC pipe.
  • 2 mm PVC tee 45 degrees.
  • 12 mm PVC tee 90 degrees.
  • 12 mm PVC outlet 90 degrees.
  • 12 mm PVC plugs.
  • wood screws.
  • glue for PVC

We measure and cut PVC pipes

Stand for PVC pipe tools
To find outWhat is the length of the pipe I need, I laid out a screwdriver hardly at a distance of 4 cm from each other. Thus, it turned out to be 62 cm (do not forget to leave space for the fitting along the edges). For smaller screwdrivers and keys, the pipe length was 30 cm.

We drill and process the holes with a scraper

Stand for tools made of PVC pipes
Stand for tools made of PVC pipes
With a marker, I marked every 4 cm across the pipe 62 cm and drilled holes in them. First 6 mm, then 8 mm with a drill bit. I hardly managed to drill them in line, but small deviations do not greatly affect the functionality of the stand. Then you need to check whether all the screwdrivers fit in the pipe. After cleaning the holes, I found that for some screwdrivers they are too small, so I expanded them with a scraper. For screwdrivers of small size and pliers I made holes with the same diameter of 8 mm, but arranged them denser.

Cut off the sleeve and hold the assembly

Stand for tools made of PVC pipes
Stand for tools made of PVC pipesStand for tools from PVC pipes Using PVC pipe residues, I cut off 3 sleeves 2.5 cm each, which I used to connect the taps to 45 ° tees (see photo). It is important that when fastening the sleeve the gap on all the elements is the same, it is better if the outlet and the tee are adjacent to each other. Using gentle blows of the hammer, connect the parts more tightly. At this stage the sleeves can be put on glue, but I decided to skip this step. Next, I assembled the whole design and made sure that everything fits the size.

Make holes in the stubs and fasten them to the table

Stand for tools made of PVC pipesStand for tools made of PVC pipes To mount the stand on the desktop, I used a PVC plug, drilling holes in them. Having inserted the plugs in the lower part of each tee, I put a stand to the place of attachment and made marks through the holes where I needed to make holes for the screws.After that, I screwed the plugs to the table and put the assembled stand on them. The construction can be secured with glue, but it turned out to be quite stable in me.
Date: 09.10.2018, 12:45 / Views: 54591

Related News


Tip 2: Why hurts the belly on the left
How to diagnose pregnancy
Bake for breakfast quick and fragrant eclairs with a filling that will permanently saturate the household
Reduce the risk of heart disease
Vanilla Chocolate Marble Cake
Exclusive Furniture