Broken pliers pliers

Surely in your garage, if you search hard, you can find broken pliers, which are long overdue. This master class is just about the fact that it is not necessary to do this, but it is necessary to turn an unnecessary piece of equipment into a very useful tool, which with a probability of 100% will be useful to even a mechanic, woodworker, or even a car mechanic. I will show you how to make rusty and broken pliers are excellent nippers. With which you can easily bite metal and not only, but more on that below.

Making pliers from old and broken pliers

Cut off the sponges, since they will no longer be needed. Mark up the cutting line with a marker.
Cutting pliers from broken pliers
Bulgarian cut sponge. Cut as smooth as possible. It's okay if rough irregularities remain.
Pliers from broken pliers
Change the drive on the grinder andwe remove the irregularities by grinding.
Cutting pliers from broken pliers
Next, we change the disc to polishing and polish the entire surface of the tool to shine, removing all the rust.
Nippers from broken pliers
Nippers from broken pliers
The result was a brilliant workpiece for future nippers.
Pliers from broken pliers
Pliers previously had pliers on the sides, but as you can see, they all fell into disrepair.
Nippers from broken pliers
We update the grooves with the cutting disc of the grinder. At the same time, it is necessary to initially combine both slots of both sides, spreading the tool handles sideways.
Nippers from broken pliers
Now the nippers are functional and become larger than they were originally. Consequently, it is now possible to bite metal rods of larger diameter.
Pliers from broken pliers
This could be stopped, but let's add functionality. Mark the holes in a straight line perpendicular to the pliers slots. Mark the points with a marker.
Cutting pliers from broken pliers
Spreading the cutter handles, drill two holes in both halves.
Cutting pliers from broken pliers
Drilling a hole from above with a grinder, but not from below.
Pliers from broken pliers
Now we’ve got a more interesting and functional tool.
Nippers from broken pliers
Nippers from broken pliers
Handles can be made wearing rubber tubes, but I didn’t have those at hand, so I took a hot glue gun and doused them with pens from the outside.
Pliers from broken pliers
It looks a little uneven.
Cutting pliers from broken pliers

Testing of wire cutters

We check the wire cutters on steel wire.Trying to eat.
Pliers from broken pliers
Everything is great - snacks be healthy!
Pliers from broken pliers
And here is the trick where you can use such a tool. They are very good at holding the nails when driving, and even better than conventional pliers. And I'm not exaggerating a single gram.
Pliers from broken pliers
And if you need to, these nails can be easily eaten.
Cutting pliers from broken pliers
These incredibly useful cutting pliers can be easily made from anybody’s unnecessary stuff that most people would just throw in the trash. And in general, such cutters can not only with pliers, but also with other broken tools. Please note that there is a lot of work with the grinder, and it is an incredibly dangerous tool that you need to work with especially carefully. Keep this in mind and take your time.

Date: 08.10.2018, 12:34 / Views: 54565

Related News


A unique mousetrap from improvised means: primitive and effective
Granny needlewoman herself cross stitch yourself wallpaper
Sand Painting
Masterclass on sewing a cover for a children's table
New Year's Stocking
How to make a bookmark-corner bat