New technology of warming floors by penokleksom
If you started a repair, and still have not decided what material to use for the floor, this article will be useful for you. In it, we will consider an inexpensive, but at the same time having a lot of advantages, the method of floor insulation using penoplex. Recently, it is often used in construction, including in the manufacture of floors. It is worth mentioning this material briefly. Unlike polyfoam, it is more durable, has higher thermal conductivity, vapor permeability, zero water absorption, and resistance to microorganisms. All these properties make this material suitable for floor insulation.Calculate how much material you need. Since the sheets of penoplex are different in size, calculate the square of the floor of the room, and already in the hardware store you can determine how many sheets are needed. The same is true of OSB.Next, you need to select the highest point (angle) in the room, and start laying the floor from it. This can be determined by the building or laser level. At the highest point, the layer of foam should be minimal. At the corners of the wall and floor, it is necessary to go through the mounting foam for waterproofing.Next, the mounting foam is applied to the floor surface, after which a sheet of Penoplex is placed on it. With the help of the construction level it is necessary to level the sheet gently tapping on it with your hand. Before applying the foam, you can slightly moisten the floor with water so that the dust does not repel the foam. If the height of the ceilings allows, and you have the opportunity to raise the floor, then as a leveling of the floor surface you can use wooden slats 2-3 cm thick. The slats are screwed to the floor level, and between them is a series of penoplex.
Floor insulation with foam plasticsSo, first you need to dismantle old floors - linoleum, parquet, etc. In apartments, the base of the floor is screed and concrete, and in private houses it can be wooden boards. If both are in good condition, then you should not change anything.The illustration shows an example of a private house where the floors are wooden, but they were in good condition. In the event that the wood is rotten, the floors must be removed and the screed should be poured with concrete. In the apartments everything will be much easier. Most often just remove the damaged cover, then you can begin to insulate. If the floors are wooden, you can further scroll them with screws to the lower beams, as over time the nails could weaken the mount. This is so that they do not creak.
Date: 09.10.2018, 10:35 / Views: 34483
Fluffy Rainbow Hair Jewelry
Down Pillows - Buying and Care
Spicy Tomato Soup
Lindsay Lohan does not support the victims of harassment and the movement MeToo
TV series. What are watching