How to make a clock mechanism
You will need
- - vinyl record;
- - clockwork;
- - white primer in a can;
- - paints;
- - water;
- - sponge;
- - decoupage card;
- - PVA glue;
- - scissors;
- - hairdryer;
- - decalcomania;
- - water;
- - capacity;
- - putty knife;
- - rice paper;
- - brush;
- - varnish;
- - finger-type battery.
Wash off the label on the vinyl record and let it dry. Prime the surface of the plate with a white spray can of primer (an alkyd universal primer will be an excellent option). This aerosol primer will create a strong connection with the surface of the plate, which will facilitate the work with it.
Decide on the background of your future hours: dilute the paint and apply it to the surface of the plate with a sponge. Let the paint dry.
Cut the motif from the decoupage card. Then, coat the surface of the vinyl record with PVA glue and dip a decoupage card into the adhesive. Carefully place the card on the surface of the plate and spread it on top of it with glue. Walk your fingers over the surface of the map and expel all bubbles accumulated under it.Let it dry (you can speed up this process using a regular hairdresser).
Transfer the decal to the future surface of the watch. To do this, first lower the decal sheet into a container with water and leave for five minutes. Then remove the napkin and, having secured this sheet in a vertical position, let the water drain. As soon as the peeling of the pattern from the paper base begins, transfer this image onto the surface of future watches by the method of sliding: that is, put a pattern on the base and gradually separate it from the paper base by folding this paper. Get rid of the bubbles - walk on the surface with a spatula. Let the base dry.
Glue rice paper on top and let the surface dry. After that, open the surface with varnish (it is recommended to do this at least three times).
Insert scissors into the hole of the plate and rotate them several times (this will increase the diameter of the hole, making it easier to installhourlymechanism).
Inserthourlymechanism (the procedure is as follows: the mechanism itself, then the loop, then the plate, and after the washer and the nut).Then put on and tightly fix the arrows: hour, minute and second. Insert the battery.
Date: 09.10.2018, 12:41 / Views: 34171
Smart Home System
The idea of decor for the New Year holidays
How to teach a dog to look
Features of unusual Japanese tattoos
15 harmful products that actually bring great health benefits
29 Children's Rooms in Black and White