How can you quickly get rid of rust?
Rust can ruin and even destroy any surface, so you need to deal with it immediately. And how to get rid of rust?
Why does rust appear?
- Contact of metal with water. If water is constantly present on the surface, then after a while rust on it is sure to form.
- Exposure to salts. Even the most common table salt can react with the metal, resulting in rust.
- Pollution. The dirt can contain a variety of chemical elements and water, which will have a negative impact on the surface.
- Coverage damage. Most metal surfaces of various devices and objects have a special coating that protects them from contact with air and water. And if such a coating is damaged, rust may appear.
- Some pure metals may rust with prolonged contact with oxygen.
- Exposure to certain chemicals that can be contained even in detergents.
How to solve a problem?
How to remove rust? There are several different ways, each of them deserves attention.
If the rust layer has a small thickness, and it does not penetrate deep into the surface, then you can try to remove it mechanically. Removal can be done, for example, with sandpaper, knife, grinder, grinder or other devices and devices. But you can only clean items with simple shapes and a minimum of detail in this way.
The rust breaks down and lags behind the surfaces under the influence of elevated temperatures.
- If you need to remove rust in the bathroom, namely on the bath itself, you can fill it with boiling water and leave it for a while. After this, the removal of plaque can be done mechanically.
- You can use a steam generator or steamer (iron can also be used with a steam function). Direct a stream of hot steam to the surface covered with corrosion for a few minutes, then remove the deposit with a rag. Repeat the procedure if necessary.
- You can use a gas burner.Simply heat the surface, and then try to clean it.
In hardware stores you can find special tools used to remove rust from various surfaces. They contain special components that literally corrode corrosion and allow you to quickly remove it. When treating the surface by any means, care should be taken.
First, be sure to wear rubber gloves to protect your hands from chemical burns. Secondly, it is advisable to wear a respirator, as the drug may have a strong odor and contain harmful volatile substances. Thirdly, it is superfluous to wear protective goggles that will protect your eyes. Fourth, by all means follow the instructions that you find on the packaging of the product.
Many people use the time-tested and multi-generation folk remedies:
- Lemon juice or citric acid will help remove rust from clothing. Just squeeze out all the juice from a lemon or dissolve a teaspoon of citric acid in half a glass of warm water. Apply liquid to the stain, wait until it is completely dry, and then simply wash the item in the usual way. This tool will help remove corrosion from metal surfaces.Apply the juice to the item overnight, and then remove the rust. If the object is small, then it can be completely immersed in juice or citric acid solution. And to enhance the effect of the product, you can add table salt to lemon juice.
- You can get rid of rust with vinegar. And the more concentrated it will be, the faster rust dissolves (an ideal variant is pure acetic acid). Wet a cloth in the vinegar and carefully treat the surface. If persistent, leave a damp cloth overnight. Handle with gloves!
- A modern and not very common means against rust is Coca-Cola. It contains phosphoric acid, which copes well with corrosion. Apply the drink to the surface and after a few hours remove the plaque. If the rust has eaten deeply, put a rag moistened in a liquid on the stain and leave it overnight.
- Remove rust will help ordinary baking soda. Take a few tablespoons of powder, add a little warm or even hot water (but not boiling water) to make a rather thick gruel. Apply the mass to the places affected by corrosion and leave for a few hours or overnight, after which just remove the coating with a rag.By the way, soda perfectly bleaches, so that it will help remove not only rust, but also any contamination from both different light surfaces and from white linen.
- You can use fresh potatoes. Grate it on a fine grater and apply it to the surface covered with corrosion. Leave the gruel overnight, and then remove it along with the rust.
- Hydrogen peroxide can help with corrosion. Treat the surface with it and remove plaque.
- Tartar can remove rust stains. Dissolve the powder with water and apply the slurry to rust.
- Mix in equal proportions of tooth powder, glycerin and water. Apply the mixture to the surface at night, in the morning remove the scurf.
- Use a weak solution of hydrochloric acid or phosphoric acid. Do not forget to wear gloves!
- Tomato juice or natural tomato sauce will help.
- Always wipe dry any metal surfaces.
- Remove any dirt immediately.
- Do not store clothing near or in metal objects (for example, in metal boxes or in old cabinets with rusty nails).
- If the metal surface is coated, be sure to protect it from damage.
- Painted surfaces periodically cover with an additional layer of paint.
Have a good rust removal!
Date: 09.10.2018, 10:30 / Views: 31461
Delightful decor from old baseboards that will save a budget
Cardboard cake is the most modern greeting
Potato pancakes with cheese
Embroidered flowers - an advertising ploy of the 1930s, and design ideas
Where is the best way to spend a birthday at 14
The miraculous transformation of the board with a flaw in a luminous table
How to make a bookmark-corner bat