Casket - a souvenir "Dandelion"
The composition is made in the combined technique of primed textiles and guilloche. Fabric and ribbons used.
For work we need materials: - sewing machine. - soldering iron with a sharp tip. - dense white fabric . - filler. - thread with a needle. - scissors. - acrylic paints. - wire. - yellow tape 2 cm wide. - brown eye shadow. - pencil. - black pen. - brushes for paints. - hairspray. - foil. - plastic small can with lid.- golden brown Asuka. - glue gun. - Iron ruler. - Toilet paper. - PVA glue. - Small glass. - Tea infuser bag. - Satin. green ribbon 5 cm wide. In the beginning we will draw the templates. The leaves have an unusual shape, like a Christmas tree. And the head resembles a pear. Separately, we make a sketch of drawing the eyes, nose and mouth.
Then we fold the white dense fabric in two layers and circlehead. Line on the machine along the contour, leaving the segment where the neck will be attached. Carefully cut out with small allowances.
Then we turn out through a free segment and take a filler.
Good we fill, but we don’t sew up the hole.
Now you need to make a stem to a dandelion. We take the wire, in its length we take into account the lower part for fastening, the height to the head, which is 1.5 times higher than the selected can. And a small ring will be at the top, which will enter the head. From the green ribbon cut the desired length of the segment.
Next, just wrap along the wire and glue it, it turns out the stem.
And then we take acrylic paints. We draw eyes. Black pupil, blue part and white stripes. And from the pupil should be added on top of blue paint.
Go to the yellow nose and brighten the cheeks.
To complete work on the face, you should again go through all the contours with a pen and add eyebrows, eyelashes, freckles, glare on the eyes. The head is ready.
We turn to the manufacture of leaves. We will use the technique of burning on the fabric. We take the wire and the soldering iron with a fine tip.
The length of the leaves is just above and below the main stem. They can make 5 - 6 pieces. And, accordingly, we cut pieces of green tape, two pieces per leaf. Then the wire should be taken a little longer by 5 - 7 cm. And then it should be glued to each sheet in the middle and between the two tapes. Then we have the blanks on the glass and draw the shape of the sheet with a soldering iron. Or repeat along the contour of the template.
Now we come to the flowers. Prepare two pieces of 20 cm of yellow tape.We cut them with the help of a soldering iron and an iron fringe ruler.
And we begin to assemble dandelions. For one flower, we take a cut ribbon, wire, 5 cm in size smaller than the main stem, and add it for fastening. You also need a piece of a whole ribbon and a foil ball.
Foil on the stem.
A We glue the foil with a piece of the whole tape tightly.
Yes It is necessary to attach a fringe and flower preparation.
And we have two dandelions.
Now need sepals. And from the green ribbon you need to cut like weed. On a strip of 10 cm with a soldering iron, we draw a line in the middle, resembling sharp teeth.It seems that we divide the tape in half, but with a jagged line. It should be two weeds.
It remains only to glue them to the bottom of the flowers.
But we still bald head. To do this, we cut 10 yellow stripes of 18 cm each. And we make of them a beautiful fringe.
Then we glue each strip into a separate brush.
It remains only to fluff them up with your hands.
Now we glue this hair to the head while standing. The first three are placed at the forehead.
Next in a circle we descend to the neck, distribute 4 more bunches.
And the remaining 3 brushes are glued in the middle of the resulting circle. Now go to the bank with a lid. We make several holes in the lid with a soldering iron.
They are needed for a tight fastening of the details of the composition. We first fasten a dandelion with an attractive face.
And the rest are placed in the center of the lid.
Next we will make a flower pot from a jar ok with a secret. Lubricate the center of the cover with PVA glue and sprinkle with tea bag brewing - it will be peat.
While it is drying up, let's proceed to decorating the rest of the jar. We turn upside down and gradually glue the pieces of toilet paper, connected with white glue.We create volume irregularities.
Now, again, go to the lid. Here we add a volume of the same paper on top of the edge.
And when the glue is well dried, decorate the resulting flower pot with golden paint. In addition, we fasten a yellow ribbon with a bow on the side edge of the lid.
It only remains to straighten all the details on the wire in the best direction for you.
Our surprise box is ready.
Good luck to all!
Date: 08.10.2018, 13:27 / Views: 64575
Cucumber in the technique of papier-mâchéCamengo wallpapers: review of the brandHow to seal a hole in the interior doorPaper Sunflower11 unusual ways to use molds for cupcakes