Angel and Demon Wire Pendant

Materials and tools:

  1. black wire with a thickness of 0.8 and 0.4 mm;
  2. silver (color) wire with a thickness of 0.8 and 0.3 mm;
  3. pliers;
  4. Chain.

Step 1

First of all we draw a sketch of the future pendant in a natural size.

Step 2

We make an angel wing from a wire - a detailed description can be found in our workshop, Butterfly Wire Pendant.

Step 3

We take a thick black wire, at the end we bend the ring. Then we put an angel's wing on the table and, focusing on him, bend the black wire in an arc, make a ring and begin to bend the inner arc.

Step 4

In the inner part of the wing, we flex the fingers of a wire like a bat - there will be 3 of them all: the first is small, the second is slightly larger and the third is the greatest.

How to bend and the result is well shown in the photo and there is nothing complicated. Bite off excess wire and bend the ring at the end.

Step 5

Decorate the demon's wing. Take a thin black wire, do a few turns around the first "finger," then around the second, etc., after the fourth bite off the wire.

The same is repeated two more times.

Everything, the demon's wing is ready.

Step 6

It remains to connect the wings of the angel and the demon. We bite off one piece of thin black and silver wire. We lay the wings next to each other and in two places we wind several turns of black wire, just below the silver wire.

Winding tightly putting a coil inround and well pulling the wire. Bite off the extra wire.

We attach a ring to the demon's wing and can be hung on a chain.

All,Angel and Demon Pendantis ready.


Date: 09.10.2018, 07:51 / Views: 62192

Related News


The most fashionable and stylish coats, Winter 2015-2016, photo
Newspaper Ottoman
Needle needle as a sewing machine
Do-it-yourself door slopes
Knit a simple scarf with a beautiful pattern
Tatar patties
The splendor of the jewelry garden of Kunio Nakajima