Reworking the box using different decor techniques
Many women keep old things for years, which they can not throw out their hand, and they do not fit for everyday use. For example, painted wooden boxes. But any old stuff can easily give a second life! If your jewelry and jewelry are stored in many different boxes, then your grandmother's jewelry box can become the center of unity for the dear ones. Of course, after a thorough rework of its external and internal content. A little patience and time, minimum costs and maximum pleasure will be provided! Materials for work: 1. Wooden casket - 1 piece, 2. Beads - in number along the perimeter of the bottom and the lid of the inside of the box; 3. Velvet paper - 2 sheets; 4. Lacquer Crackle - 1 jar, 5. Paper print color - to cover the side and top of the box; 6. Glue PVA - 1 pencil; 7.Solvent, emery paper, brush, scissors, paints, skewer for applying point painting, knife for cutting paper, eyeshadow in print color, spatula from plasticine, glue “liquid nails”. Stages of work: The first stage: we remove the former beauty from the surface. To facilitate the removal of the painted picture, remove the top lacquer fixing layer with a solvent. We moisten a cotton swab with any solvent and carefully wipe the entire casket with it.We tightly press against the surface of the casket, carefully smoothening every inch of the pattern. Box tightly close and fasten the printed borders on the sides.
After the solvent has dried, we remove the remnants of the former luxury with sandpaper. We clean the surface until smoothness appears.Second stage: preparing the foundation. When using dark tones for the foundation, they can be applied in pure form. If the base is light, then using a pure white color will lead to a dirty shade after applying the varnish. Therefore, in a drop of "ocher" dissolve the whiteness.We put a couple of layers of gouache paints on the entire surface of the box.Let each layer dry thoroughly.T stage III: simulate decoupage. If there is no suitable beauty for decoupage napkins, you can use a color printout of your favorite patterns. In the present embodiment, colored borders were used for the background of the side parts of the box, and for the front side - the combined frame and picture.With printouts we cut off unnecessary moments.Combine the frame and picture.We apply a thick layer of PVA glue on the back side.
After the solvent has dried, we remove the remnants of the former luxury with sandpaper. We clean the surface until smoothness appears.
Skewer for applying a dot painting on the joints of oblique gold lines, we put the dots. In the absence of a special skewer, you can use the back of a thin brush or a sushi stick.
Date: 09.10.2018, 09:39 / Views: 65574
Denim skirt with embroidery
What if small breasts
30 Flawless Examples of Using Ombre Techniques in the Interior
How to make money on polls
We decorate the old cabinet
Selection of flat waterproofing roofing materials
Installing an infrared film floor
How to eat to live long